Baker

[Elmidd]

What years did Baker manufacture the Baker Monitor Steel model E?

[Windcatcher530 Dan]

Are you sure it's a E and not a B ?

[CTXmiller]

The E is an open gear and was replaced by the K. I remember someone having the production years of the various open gear models, but I can’t find it.

[CTXmiller]

What I was thinking about that I had seen was production years for the 10’ X & J models, not the 8’ E. However the E is found on the same literature as the X and the X was produced from about 1900 to 1908.

[Windcatcher530 Dan]

Michael i checked my litterateur and couldn't find anything on a model E. If you find something please share, Is the E for the size of the Mill?

[CTXmiller]

Dan,

Correct, the size of the mill is by the letter:
V = 5’
E or K or S = 8’
(I’ve never seen an S, but I have a few wheel sections that I think go to an S)
X or J = 10’
H = 12’

There might be others, but the above is all that currently comes to mind.

[Elmidd]

Are you sure it's a E and not a B ?

My Baker is open gear

[Elmidd]

The E is an open gear and was replaced by the K. I remember someone having the production years of the various open gear models, but I can’t find it.

Thanks for checking

[Elmidd]

What I was thinking about that I had seen was production years for the 10’ X & J models, not the 8’ E. However the E is found on the same literature as the X and the X was produced from about 1900 to 1908.

Thank you for checking

[Wayne]

The windmillers Bible says on page 136. The first of the Monitor Steel windmills in 1898 were the ten-foot Style D and the eight-foot Style E.