Asking for a friend for a ID on the tower cap and storm stay.
Is it a Woodmance?
Thank you for your help.
Terry
Parts ID
-
Windcatcher530 Dan
- Posts: 2407
- Joined: Sun Mar 28, 2021 4:06 pm
- Location: Alcove N.Y.i buy and restore
Re: Parts ID
Terry besides the four tower bolt holes are the other holes for oiling?
Re: Parts ID
Top photo same as my Ideal Steel.
Mike B
Mike B
Re: Parts ID
Dan, if you are asking about the top casting the other holes are so you could also use it in a three legged tower.
-
Windcatcher530 Dan
- Posts: 2407
- Joined: Sun Mar 28, 2021 4:06 pm
- Location: Alcove N.Y.i buy and restore
Re: Parts ID
Gotcha, thanks Wayne. Other companies should have thought of that
Re: Parts ID
I think Monitor also did one. Think I have a three legged tower with the monitor casting.
Re: Parts ID
If it is a Monitor tower top, it's in very good shape. Those always wear on one side and get egged real bad. Monitor also put a side in for a grease cup. Need to check one at the shop, see if the number matches. If it is NOT a Monitor top, it resembles one. The stay is a Stover. Also used for Woodmanse later on, after they bought out Stover.
Call Dan Benjamin for parts. P M me for the phone number. IF YOU TALK TO HIM, AND HE HELPS YOU, THEN BUY FROM HIM. IT CREATES GOOD KARMA.
