Wooden Sucker rod end

Wayne · Post by **Wayne** » Tue Dec 21, 2021 3:06 pm

Does anybody have one of the ends of an old wooden sucker rod they would part with. I don't care which end male or female. I can make it work with the end I have. I want to put a wooden rod coming down from the windmill to a pump it won't pump water just move up and down. It is for the Dandy I'm putting up at our Pioneer Village.

Windcatcher530 Dan · Post by **Windcatcher530 Dan** » Tue Dec 21, 2021 5:06 pm

Wayne are you talking about the cast iron swivel that connects the pump rod to the wooden sucker rod. If you are i believe Steve has one it might need welding

Windcatcher530 Dan · Post by **Windcatcher530 Dan** » Tue Dec 21, 2021 5:22 pm

This is what it looks like

20211221_181654.jpg

windybob · Post by **windybob** » Tue Dec 21, 2021 5:24 pm

Wayne I have a couple, still on a wood rod. I don't think I have a spare off a rod,I will look. They are galvanized, 5/8 threads ( male and female) on the ends.

Windcatcher530 Dan · Post by **Windcatcher530 Dan** » Tue Dec 21, 2021 7:49 pm

Windy would you happen to have the round cast piece that goes over the pump rod with a set screw but isn't threaded that fits inside the swivel i posted a picture of

windybob · Post by **windybob** » Wed Dec 22, 2021 7:39 am

I know I have one, but not sure if I have an extra. Next time I get to the shop I will check.

Windcatcher530 Dan · Post by **Windcatcher530 Dan** » Wed Dec 22, 2021 7:53 am

Thanks windybob

Wayne · Post by **Wayne** » Wed Dec 22, 2021 8:43 am

Windy here is what I have. If your pieces look like this one, mine is a female, but as I said it doesn't matter as I can make it work. I was going to use this end to hook to my pump. Would you sale one of yours I'll pay shipping. Or if you want to sale them as a pair I'd do that. Thanks You can send me a PM if you want.

image000000(100).jpg

windybob · Post by **windybob** » Wed Dec 22, 2021 8:52 am

WHen I get by the shop I will check. I know I have a full stick with both ends. Not sure if I have extras. I might have used it at one time to hook up a well.

mtblah · Post by **mtblah** » Wed Dec 22, 2021 9:08 am

I have a few 20 ft length origional sucker rods.
Mike B
New Braunfels TX

Vintage Windmill and Wind Generator Forum

Wooden Sucker rod end

Wooden Sucker rod end

Re: Wooden Sucker rod end

Re: Wooden Sucker rod end

Re: Wooden Sucker rod end

Re: Wooden Sucker rod end

Re: Wooden Sucker rod end

Re: Wooden Sucker rod end

Re: Wooden Sucker rod end

Re: Wooden Sucker rod end

Re: Wooden Sucker rod end