Page 1 of 1
Samson Stover Model S - 12 foot
Posted: Fri Apr 18, 2025 2:49 pm
by dnfo
Samson Stover Model 12S.
On the ground with good access.
Also some miscellaneous parts.
Hate to scrap it.
Re: Samson Stover Model S - 12 foot
Posted: Sat Apr 19, 2025 5:38 am
by mtblah
Dave , what is the water table in your area that a 12 ft'r was needed .?
Mike B
New Braunfels TX
Re: Samson Stover Model S - 12 foot
Posted: Sat Apr 19, 2025 8:41 am
by TdcJD
Sent you a pm
Re: Samson Stover Model S - 12 foot
Posted: Sun Apr 20, 2025 7:19 pm
by dnfo
Mike B.
Wells in this area typically run 300 to 400 feet.
There is a Texas Water Development Board monitoring well in this area. Well depth is 620 feet and water table was at 454 feet on 3/31/25.
Re: Samson Stover Model S - 12 foot
Posted: Mon Apr 21, 2025 6:52 am
by mtblah
Dave , thanks for that info , those depths account for the larger size fan's to lift that quanity of water
Re: Samson Stover Model S - 12 foot
Posted: Sun Apr 27, 2025 11:44 am
by TdcJD
One 12ft Samson loaded and on the way to a new home.
I have no idea how im going to get this out of my truck.... Haha
Re: Samson Stover Model S - 12 foot
Posted: Sun Apr 27, 2025 3:10 pm
by CTXmiller
That is a full load.
Re: Samson Stover Model S - 12 foot
Posted: Thu May 01, 2025 11:58 pm
by dnfo
As TdcJD reported glad to say this windmill found a new home and has a new lease on life.
Re: Samson Stover Model S - 12 foot
Posted: Fri May 02, 2025 6:55 am
by mtblah
Dave , thanks for sharing , Thomas & I spent some time unloading that beast and set it up on the stub tower , i appears to be mostly complete , now the next step is the restoration ,,,,
