Page 2 of 2
Re: A-402 tail folding when turning left to right
Posted: Mon Sep 07, 2020 5:53 pm
by 61hawk
Replaced the pump rod this afternoon with a 12-14" rod and all is good.
Re: A-402 tail folding when turning left to right
Posted: Wed Sep 09, 2020 11:26 am
by gregguy
Can you tell me more about the bearing you show in the picture above and how I might get one.
Brand, model, size, availability, all the good stuff.
My A-402 is going up within the month......greg
Re: A-402 tail folding when turning left to right
Posted: Thu Sep 10, 2020 4:50 pm
by gregguy
Could anyone give me some information about the bearing shown in the beginning of this thread?
Looks like it might be a good addition to my A-402RA which is going up this month.
That is if my house doesn't burn down in all these Oregon forest fires.
Re: A-402 tail folding when turning left to right
Posted: Thu Sep 10, 2020 6:13 pm
by windybob
Dang! I have relatives in Salem. My sister said there was a red sky the other day. Not good!
Re: A-402 tail folding when turning left to right
Posted: Thu Sep 10, 2020 9:35 pm
by 61hawk
I don't remember exactly which bearings and washers I bought but I got them from here, you'll just need to take some measurements of the mast shaft diameter.
https://www.mcmaster.com/thrust-bearing ... -bearings/