Page 2 of 3
Re: Dempster/Duplex/Massey Harris
Posted: Sun Jan 26, 2025 12:32 pm
by mtblah
Peter , thanks for the update , keep us posted w/photo's as usual , we all enjoy the perfect restoration you do with Canadian branded windmills !
Mike B
New Braunfels TX
Re: Dempster/Duplex/Massey Harris
Posted: Mon Jan 27, 2025 8:43 am
by Wayne
The inner band on my Duplex is 26 7/8th. It's cut at an angel the short side of angle is 25 1/2.
Re: Dempster/Duplex/Massey Harris
Posted: Mon Jan 27, 2025 4:31 pm
by Peter vk
Thank you Wayne, can you also measure the width and height.
I also got the Demster together, that thing was quite an ordeal
Re: Dempster/Duplex/Massey Harris
Posted: Mon Jan 27, 2025 5:01 pm
by Peter vk
Im going to make the hood for the Dempster, if someone has one could you measure it for me, thanks
Re: Dempster/Duplex/Massey Harris
Posted: Tue Jan 28, 2025 8:57 am
by Wayne
It's 1 inch thick by 3 inches wide. I don't know that it has to be that thick since there isn't a lot of push and pull on it like the upper one.
Re: Dempster/Duplex/Massey Harris
Posted: Tue Jan 28, 2025 10:50 am
by Peter vk
Thank you Wayne
Re: Dempster/Duplex/Massey Harris
Posted: Tue Jan 28, 2025 8:16 pm
by Terry
Peter
I restored a Dempster #14 a few years ago.
I measured the hood today.
If you need more let me know.
Terry
Dempster no. 14 hood dimensions.pdf
Re: Dempster/Duplex/Massey Harris
Posted: Tue Jan 28, 2025 8:27 pm
by Terry
IMG_20250128_153313445.jpg
IMG_20250128_153249262.jpg
IMG_20250128_153235802.jpg
Re: Dempster/Duplex/Massey Harris
Posted: Tue Jan 28, 2025 8:30 pm
by Terry
IMG_20250128_153448413.jpg
IMG_20250128_153422402.jpg
IMG_20250128_153339043.jpg
IMG_20250128_153333320_HDR.jpg
Re: Dempster/Duplex/Massey Harris
Posted: Wed Jan 29, 2025 6:27 am
by Peter vk
Thank you for taking the time Terry, much appreciated. Were there two different lids, mine bolts on the side and no hole on top?
Peter