Wooden Sucker rod end
Re: Wooden Sucker rod end
ignore the 1st double exposure miss print
-
Jim Corcoran
- Posts: 311
- Joined: Fri Dec 21, 2018 7:32 am
- Location: Austin, Texas
Re: Wooden Sucker rod end
Wayne,
If this is what you need, it's yours.
Regards,
Jim
If this is what you need, it's yours.
Regards,
Jim
You do not have the required permissions to view the files attached to this post.
" You need to get at least 30 miles out of Austin before you're firmly back in Texas."
Re: Wooden Sucker rod end
There ya go Wayne. A set. That's more than I have.
Call Dan Benjamin for parts. P M me for the phone number. IF YOU TALK TO HIM, AND HE HELPS YOU, THEN BUY FROM HIM. IT CREATES GOOD KARMA.
Re: Wooden Sucker rod end
Yeah Man! I sent you a PM Jim.
Re: Wooden Sucker rod end
Wow! You do have some sucker. The best I can figure mine is will only need to be about 12=14 ft long. I'll have to size it after I get the tower up and pump set in place. Are those rods 1 1/4 inch square? My Dandy tower has the rod guide in it and the square hole is a little bigger than 1 1/4 inch.
Re: Wooden Sucker rod end
Round , 1 1/8 dia + or - these were trees so there is some veriance
14 ft 4 inches long measured from end of fitting to opposite end of fitting .
+ or - an inchch or so .
Mike B
14 ft 4 inches long measured from end of fitting to opposite end of fitting .
+ or - an inchch or so .
Mike B
-
Windcatcher530 Dan
- Posts: 2407
- Joined: Sun Mar 28, 2021 4:06 pm
- Location: Alcove N.Y.i buy and restore
Re: Wooden Sucker rod end
Windy thanks for PM sorry but I haven't figured out how to respond back.im gonna try to find the original first if i can't I'll try what you suggested.Thanks
Re: Wooden Sucker rod end
That's fine. no problem.
Call Dan Benjamin for parts. P M me for the phone number. IF YOU TALK TO HIM, AND HE HELPS YOU, THEN BUY FROM HIM. IT CREATES GOOD KARMA.
