New Member

[Nick48]

Yes I just got the pictures back today and it is A305 I will try to post some of the new pictures

[Nick48]

The 30ft windmill tower has 7’5” footprint and is 2 1/2” galvanized angle and looks to have been welded up, I’m not for sure the pictures will post but I will give it another try

https://share.icloud.com/photos/096itDv ... hOS31iFQeA

https://share.icloud.com/photos/077JZ90 ... bOeNhY7pGA
https://share.icloud.com/photos/0c3g80G ... 2p0fmmznaQ
https://share.icloud.com/photos/0cfu6MC ... e7hAp1W8Ng
https://share.icloud.com/photos/007LLwH ... Szb0jYafgA
https://share.icloud.com/photos/070r_qP ... JE6va8XZDg
https://share.icloud.com/photos/0ab3sW1 ... -tEDkH_UvA
https://share.icloud.com/photos/08bN_Xs ... -1hvJfRgMw

[Windcatcher530 Dan]

Yep pretty sure she's a RA model. I see the pitman arm is busted and the bolt that holds it to the gear. Also I don't see the brake. But I am amazed at the good condition of the small and large gear not much wear at all. Thanks for the pics.!!

[Ron Stauffer]

Larry
Lots of good pics but not a definitive one. A RA will have these double nutted studs to hold the arms in and main frame will be marked A02. A 1903 won't have the studa and main frame will be A2. I thought I had 1903s here but couldn't find any. Maybe Georgetown Larry got them awhile back.

20250427_165752.jpg

I am still looking at references on the tower.
Ron

[mtblah]

Has anyone heard from Georgetown Larry in a while ?
He had a couple windmills standing in the yard & a carport full of projects
I bought a few Aermotor parts from him several years back , lost his # and address .
Mike B
New Braunfels TX

[Ron Stauffer]

Has anyone heard from Georgetown Larry in a while?

I know I touched bases on his last birthday and maybe since. If you want his contactive info, PM me.
Ron

[Ron Stauffer]

I hope you didn't get those Aermotor post mounts from him, those are the only ones I ever got.
Ron

[Windcatcher530 Dan]

Aermoter opened a branch house in MO. In 1894 maybe they supplied the tower and Mill? It's hard to tell but it looks like the owner might have welded those arms on some time cause I see the pitman arm was welded.

[Nick48]

Ron
Thanks for the picture and the information I will try to get a couple more pictures of the main frame.Larry

[Ron Stauffer]

If you have a pair of Nikon Eagleview binocs, that works too. Just look on the red main frame above for the position of the part#. A02 is RA and A2 is 1903.